The raw materials are ceramic fiber bulk,inorganic filler,a small amount of organic binder and water repellent.It is one plate shaped fiber products though long nets scooping technology with continous production process.
Strict control of raw materials
Control impurity content, ensure low thermal shrinkage, and improve heat resistance
1. CCEWOOL ceramic fiber boards use high-purity ceramic fiber cotton as the raw material.
2. Controlling the content of impurities is an important step to ensure the heat resistance of ceramic fibers. High impurity content can cause the coarsening of crystal grains and the increase of linear shrinkage, which is the key reason for the deterioration of fiber performance and the reduction of its service life.
3. With the imported high-speed centrifuge of which the speed reaches up to 11000r/min, the fiber formation rate is higher. The thickness of the produced CCEWOOL ceramic fiber is uniform and even, and the slag ball content is lower than 10%.
Production process control
Reduce the content of slag balls, ensure low thermal conductivity, and improve thermal insulation performance
1. The CCEWOOL ceramic fiberboard production line has a fully automatic drying system, which can make drying quicker and more thorough. The deep drying is even and can be completed in 2 hours. The products have good dryness and quality with compressive and flexural strengths over 0.5MPa.
2. The products produced by the fully automatic ceramic fiber board production lines are more stable than the ceramic fiber boards produced by the traditional vacuum forming process. They have good flatness and accurate sizes with the error +0.5mm.
3. Good hydrophobic property,hydrophobic rate more than 98%; Good rigid property,high-strength,anti-vibration, corrosion.
4. CCEWOOL ceramic fiber boards can be cut and processed at will, and the construction is very convenient. They can be made into both organic ceramic fiber boards and inorganic ceramic fiber boards.
Quality control
Ensure bulk density and improve thermal insulation performance
1. Each shipment has a dedicated quality inspector, and a test report is provided prior to the departure of products from the factory to ensure the export quality of each shipment of CCEWOOL.
2. A third-party inspection (such as SGS, BV, etc.) is accepted.
3. Production is strictly in accordance with ISO9000 quality management system certification.
4. Products are weighed before packaging to ensure that the actual weight of a single roll is greater than the theoretical weight.
5. The outer packaging of each carton is made of five layers of kraft paper, and the inner packaging is a plastic bag, suitable for long-distance transportation.
Characteristics:
OutsGood hydrophobic property,hydrophobic rate more than 98%;
Low thermal conductivity, non-combustible, moisture-proof, good sound absorption;
Good rigid property,high-strength,anti-vibration, corrosion;
Convient construction,good stability,long useful life.
Application:
Widely used in shipping building,metallurgical machinery,petro-chemical industry;
Nuclear power,automobile;
Municipal heating system and building;
Wall composite and proof insulation.